Ghost imaging-based Non-contact Heart Rate Detection

Remote heart rate measurement is an increasingly concerned research field, usually using remote photoplethysmography (rPPG) to collect heart rate information through video data collection. However, in certain specific scenarios (such as low light conditions, intense lighting, and non-line-of-sight situations), traditional imaging methods fail to capture image information effectively, that may lead to difficulty or inability in measuring heart rate. To address these limitations, this study proposes using ghost imaging as a substitute for traditional imaging in the aforementioned scenarios. The mean absolute error between experimental measurements and reference true values is 4.24 bpm.Additionally, the bucket signals obtained by the ghost imaging system can be directly processed using digital signal processing techniques, thereby enhancing personal privacy protection.

Non-invasive color imaging through scattering medium under broadband illumination

Due to the complex of mixed spectral point spread function within memory effect range, it is unreliable and slow to use speckle correlation technology for non-invasive imaging through scattering medium under broadband illumination. The contrast of the speckles will drastically drop as the light source's spectrum width increases. Here, we propose a method for producing the optical transfer function with several speckle frames within memory effect range to image under broadband illumination. The method can be applied to image amplitude and color objects under white LED illumination. Compared to other approaches of imaging under broadband illumination, such as deep learning and modified phase retrieval, our method can provide more stable results with faster convergence speed, which can be applied in high speed scattering imaging under natural light illumination.

Ghost Imaging Based on Recurrent Neural Network

Benefit from the promising features of second-order correlation, ghost imaging (GI) has received extensive attentions in recent years. Simultaneously, GI is affected by the poor trade-off between sampling rate and imaging quality. The traditional image reconstruction method in GI is to accumulate the action result of each speckle and the corresponding bucket signal. We found that the image reconstruction process of GI is very similar to the Recurrent Neural Network (RNN), which is one of the deep learning algorithm. In this paper, we proposed a novel method that effectively implements GI on the RNN architecture, called GI-RNN. The state of each layer in RNN is determined by the output of the previous layer and the input of this layer, and the output of the network is the sum of all previous states. Therefore, we take the speckle of each illumination and the corresponding bucket signal as the input of each layer, and the output of the network is the sum of all previous speckle and bucket signal, which is the image of the target. The testing results show that the proposed method can achieve image reconstruction at a very low sampling rate (0.38$\%$). Moreover, we compare GI-RNN with traditional GI algorithm and compressed sensing algorithm. The results of different targets show that GI-RNN is 6.61 dB higher than compressed sensing algorithm and 12.58 dB higher than traditional GI algorithm on average. In our view, the proposed method makes an important step to applications of GI.

Speckles-Training-Based Denoising Convolutional Neural Network Ghost Imaging

Ghost imaging (GI) has been paid attention gradually because of its lens-less imaging capability, turbulence-free imaging and high detection sensitivity. However, low image quality and slow imaging speed restrict the application process of GI. In this paper, we propose a improved GI method based on Denoising Convolutional Neural Networks (DnCNN). Inspired by the corresponding between input (noisy image) and output (residual image) in DnCNN, we construct the mapping between speckles sequence and the corresponding noise distribution in GI through training. Then, the same speckles sequence is employed to illuminate unknown targets, and a de-noising target image will be obtained. The proposed method can be regarded as a general method for GI. Under two sampling rates, extensive experiments are carried out to compare with traditional GI method (basic correlation and compressed sensing) and DnCNN method on three data sets. Moreover, we set up a physical GI experiment system to verify the proposed method. The results show that the proposed method achieves promising performance.

Generative-Adversarial-Networks-based Ghost Recognition

Nowadays, target recognition technique plays an important role in many fields. However, the existing image information based methods suffer from the influence of target image quality. In addition, some methods also need image reconstruction, which will bring additional time cost. In this paper, we propose a novel coincidence recognition method combining ghost imaging (GI) and generative adversarial networks (GAN). Based on the mechanism of GI, a set of random speckles sequence is employed to illuminate target, and a bucket detector without resolution is utilized to receive echo signal. The bucket signal sequence formed after continuous detections is constructed into a bucket signal array, which is regarded as the sample of GAN. Then, conditional GAN is used to map bucket signal array and target category. In practical application, the speckles sequence in training step is still employed to illuminate target, and the bucket signal array is input GAN for recognition. The proposed method can improve the problems caused by existing recognition methods that based on image information, and provide a certain turbulence-free ability. Extensive experiments are show that the proposed method achieves promising performance.

Ptychography Intensity Interferometry Imaging for Dynamic Distant Object

As a promising lensless imaging method for distance objects, intensity interferometry imaging (III) had been suffering from the unreliable phase retrieval process, hindering the development of III for decades. Recently, the introduction of the ptychographic detection in III overcame this challenge, and a method called ptychographic III (PIII) was proposed. We here experimentally demonstrate that PIII can image a dynamic distance object. A reasonable image for the moving object can be retrieved with only two speckle patterns for each probe, and only 10 to 20 iterations are needed. Meanwhile, PIII exhibits robust to the inaccurate information of the probe. Furthermore, PIII successfully recovers the image through a fog obfuscating the imaging light path, under which a conventional camera relying on lenses fails to provide a recognizable image.

Imaging around corners with single-pixel detector by computational ghost imaging

We have designed a single-pixel camera with imaging around corners based on computational ghost imaging. It can obtain the image of an object when the camera cannot look at the object directly. Our imaging system explores the fact that a bucket detector in a ghost imaging setup has no spatial resolution capability. A series of experiments have been designed to confirm our predictions. This camera has potential applications for imaging around corner or other similar environments where the object cannot be observed directly.