MACE CT Reconstruction for Modular Material Decomposition from Energy Resolving Photon-Counting Data

X-ray computed tomography (CT) based on photon counting detectors (PCD) extends standard CT by counting detected photons in multiple energy bins. PCD data can be used to increase the contrast-to-noise ratio (CNR), increase spatial resolution, reduce radiation dose, reduce injected contrast dose, and compute a material decomposition using a specified set of basis materials. Current commercial and prototype clinical photon counting CT systems utilize PCD-CT reconstruction methods that either reconstruct from each spectral bin separately, or first create an estimate of a material sinogram using a specified set of basis materials and then reconstruct from these material sinograms. However, existing methods are not able to utilize simultaneously and in a modular fashion both the measured spectral information and advanced prior models in order to produce a material decomposition. We describe an efficient, modular framework for PCD-based CT reconstruction and material decomposition using on Multi-Agent Consensus Equilibrium (MACE). Our method employs a detector proximal map or agent that uses PCD measurements to update an estimate of the pathlength sinogram. We also create a prior agent in the form of a sinogram denoiser that enforces both physical and empirical knowledge about the material-decomposed sinogram. The sinogram reconstruction is computed using the MACE algorithm, which finds an equilibrium solution between the two agents, and the final image is reconstructed from the estimated sinogram. Importantly, the modularity of our method allows the two agents to be designed, implemented, and optimized independently. Our results on simulated data show a substantial (450%) CNR boost vs conventional maximum likelihood reconstruction when applied to a phantom used to evaluate low contrast detectability.

Texture Matching GAN for CT Image Enhancement

Deep neural networks (DNN) are commonly used to denoise and sharpen X-ray computed tomography (CT) images with the goal of reducing patient X-ray dosage while maintaining reconstruction quality. However, naive application of DNN-based methods can result in image texture that is undesirable in clinical applications. Alternatively, generative adversarial network (GAN) based methods can produce appropriate texture, but naive application of GANs can introduce inaccurate or even unreal image detail. In this paper, we propose a texture matching generative adversarial network (TMGAN) that enhances CT images while generating an image texture that can be matched to a target texture. We use parallel generators to separate anatomical features from the generated texture, which allows the GAN to be trained to match the desired texture without directly affecting the underlying CT image. We demonstrate that TMGAN generates enhanced image quality while also producing image texture that is desirable for clinical application.

MBIR Training for a 2.5D DL network in X-ray CT

In computed tomographic imaging, model based iterative reconstruction methods have generally shown better image quality than the more traditional, faster filtered backprojection technique. The cost we have to pay is that MBIR is computationally expensive. In this work we train a 2.5D deep learning (DL) network to mimic MBIR quality image. The network is realized by a modified Unet, and trained using clinical FBP and MBIR image pairs. We achieve the quality of MBIR images faster and with a much smaller computation cost. Visually and in terms of noise power spectrum (NPS), DL-MBIR images have texture similar to that of MBIR, with reduced noise power. Image profile plots, NPS plots, standard deviation, etc. suggest that the DL-MBIR images result from a successful emulation of an MBIR operator.

Design of Novel Loss Functions for Deep Learning in X-ray CT

Deep learning (DL) shows promise of advantages over conventional signal processing techniques in a variety of imaging applications. The networks' being trained from examples of data rather than explicitly designed allows them to learn signal and noise characteristics to most effectively construct a mapping from corrupted data to higher quality representations. In inverse problems, one has options of applying DL in the domain of the originally captured data, in the transformed domain of the desired final representation, or both. X-ray computed tomography (CT), one of the most valuable tools in medical diagnostics, is already being improved by DL methods. Whether for removal of common quantum noise resulting from the Poisson-distributed photon counts, or for reduction of the ill effects of metal implants on image quality, researchers have begun employing DL widely in CT. The selection of training data is driven quite directly by the corruption on which the focus lies. However, the way in which differences between the target signal and measured data is penalized in training generally follows conventional, pointwise loss functions. This work introduces a creative technique for favoring reconstruction characteristics that are not well described by norms such as mean-squared or mean-absolute error. Particularly in a field such as X-ray CT, where radiologists' subjective preferences in image characteristics are key to acceptance, it may be desirable to penalize differences in DL more creatively. This penalty may be applied in the data domain, here the CT sinogram, or in the reconstructed image. We design loss functions for both shaping and selectively preserving frequency content of the signal.