Abstract:Population-based structural health monitoring (PBSHM), aims to share information between members of a population. An offshore wind (OW) farm could be considered as a population of nominally-identical wind-turbine structures. However, benign variations exist among members, such as geometry, sea-bed conditions and temperature differences. These factors could influence structural properties and therefore the dynamic response, making it more difficult to detect structural problems via traditional SHM techniques. This paper explores the use of a Bayesian hierarchical model as a means of multitask learning, to infer foundation stiffness distribution parameters at both population and local levels. To do this, observations of natural frequency from populations of structures were first generated from both numerical and experimental models. These observations were then used in a partially-pooled Bayesian hierarchical model in tandem with surrogate FE models of the structures to infer foundation stiffness parameters. Finally, it is demonstrated how the learned parameters may be used as a basis to perform more robust anomaly detection (as compared to a no-pooling approach) e.g. as a result of scour.
Abstract:The use of ultrasonic guided waves to probe the materials/structures for damage continues to increase in popularity for non-destructive evaluation (NDE) and structural health monitoring (SHM). The use of high-frequency waves such as these offers an advantage over low-frequency methods from their ability to detect damage on a smaller scale. However, in order to assess damage in a structure, and implement any NDE or SHM tool, knowledge of the behaviour of a guided wave throughout the material/structure is important (especially when designing sensor placement for SHM systems). Determining this behaviour is extremely diffcult in complex materials, such as fibre-matrix composites, where unique phenomena such as continuous mode conversion takes place. This paper introduces a novel method for modelling the feature-space of guided waves in a composite material. This technique is based on a data-driven model, where prior physical knowledge can be used to create structured machine learning tools; where constraints are applied to provide said structure. The method shown makes use of Gaussian processes, a full Bayesian analysis tool, and in this paper it is shown how physical knowledge of the guided waves can be utilised in modelling using an ML tool. This paper shows that through careful consideration when applying machine learning techniques, more robust models can be generated which offer advantages such as extrapolation ability and physical interpretation.