A Metasurface-based Cross-slot Aperture Coupled Antenna Array for Ku-band Satellites in Reception

The demand for cost-effective, low-profile user terminals for satellite communications supporting multicast services for Geostationary Orbit (GEO) satellites, has become a key focus for many Direct-to-Home (DTH) providers where the high data rates in the downlink are required. Planar antenna arrays with increased frequency bandwidth and improved ratio using meta-surfaces are considered as an effective solution for such systems. This paper presents a low-cost, aperture-coupled metasurface-enhanced patch antenna, operating within the 10.7-12.7 GHz frequency range. The antenna is designed to achieve a realized gain of at least 27 dBi across the band of interest using 32 x 32 array antennas distributed in a rectangular lattice. Initially configured for linear polarization, the antenna can be upgraded to support dual or circular polarization if required.

Optimizing Antenna Activation for Even Power Distribution in Multi-Beam Satellite Systems Using Genetic Algorithm

Recent advancements in onboard satellite communication have significantly enhanced the ability to dynamically modify the radiation pattern of a Direct Radiating Array, which is essential for both conventional communication satellites like GEO and those in lower orbits such as LEO. This is particularly relevant for communication at 28 GHz, a key frequency in the mmWave spectrum, used for high-bandwidth satellite links and 5G communications. Critical design factors include the number of beams, beamwidth, and SLL for each beam. However, in multibeam scenarios, balancing these design factors can result in uneven power distribution, leading to over-saturation in centrally located antenna elements due to frequent activations. This paper introduces a GA-based approach to optimize beamforming coefficients by modulating the amplitude component of the weight matrix, while imposing a constraint on activation instances per element to avoid over-saturation in the RF chain. The proposed method, tested on an 16x16 DRA patch antenna array at 28 GHz for a CubeSat orbiting at 500 km, demonstrates how the algorithm efficiently meets beam pattern requirements and ensures uniform activation distribution. These findings are particularly relevant for emerging satellite systems and 5G networks operating in the mmWave spectrum.