Abstract:Colorless, directionless, and contentionless reconfigurable optical add/drop multiplexing (CDC-ROADM) provides highly flexible physical layer network configuration. Such CDC-ROADM must operate in multiple wavelength bands which are being increasingly implemented in optical transmission systems. The operation in C+L bands requires switch devices used in CDC-ROADM to also be capable of multiband operation. Recent studies on wavelength division multiplexing (WDM) systems have pointed out the impact of amplified spontaneous emission (ASE) noise generated by signals of different wavelengths, which causes OSNR degradation. Therefore, it is desirable to filter out the ASE noise from different transponders when multiplexing multiple wavelengths at the transmitter side, especially in a system with non-wavelength selective combiners such as directional couplers and multicast switches. The use of transponder aggregators with filtering functions, such as the M x N wavelength selective switch (WSS), is preferable for this filtering. However, the downside of these devices is that it is difficult to provide economical multiband support. Therefore, we propose an economical transponder aggregator configuration by allowing a certain amount of ASE superposition and reducing the number of filtering functions. In this paper, we fabricated a prototype of the proposed transponder aggregator by combining silica-based planar lightwave circuit technology and C+L band WSS, both commercially available, and verified its feasibility through transmission experiments. The novel transponder aggregator is a practical solution for a multiband CDC-ROADM system with improved OSNR performance.
Abstract:While ultrahigh-baud-rate optical signals are effective for extending the transmission distance of large capacity signals, they also reduce the number of wavelengths that can be arranged in a band because of their wider bandwidth. This reduces the flexibility of optical path configuration in reconfigurable optical add/drop multiplexing (ROADM) networks. In colorless, directionless and contentionless (CDC)-ROADM in particular, the effect reduces the add/drop ratio at a node. Multiband ROADM systems are an effective countermeasure for overcoming this issue, but they make the node configuration more complicated and its operation more difficult. In this paper, we analyze the challenges of C + L band CDC-ROADM and show that optical switch devices that operate over multiple bands are effective in meeting them. For this purpose, we built a C + L band CDC-ROADM node based on C + L band wavelength selective switches (WSSs) and multicast switches (MCSs) and confirmed its effectiveness experimentally. In particular, to simplify the node configuration, we propose a reduction in the number of optical amplifiers used for node loss compensation and experimentally verify its feasibility.