Spatially Distributed Task-Oriented Compression for Multi-Emitter Localization and Characterization with Spectral Overlap

Radio frequency spectrum awareness requires the ability to detect, localize, and characterize emitters in dense and contested wireless environments. In this work, we propose a task-oriented distributed compression framework for joint multi-emitter localization and characterization using spatially distributed receivers. Each receiver observes a short window of complex IQ samples, converts the observation to a time--frequency representation, and encodes it into a compact latent vector. A central fusion decoder combines the receiver latents to estimate an unordered set of active emitters, including their locations, center-frequency offsets, occupied bandwidths, and waveform families. A permutation-invariant training objective is used to handle the arbitrary ordering of emitters and predictions. Experiments on synthetic multi-emitter scenes with spectral overlap show that even extremely compact receiver-side representations can preserve useful information for emitter counting and waveform-family estimation. However, accurate localization and spectral-parameter regression require larger latent dimensions. Increasing the receiver latent dimension from $d_{\mathrm{rx}}=1$ to $d_{\mathrm{rx}}=16$ provides the largest improvement, while further increasing to $d_{\mathrm{rx}}=64$ gives smaller gains. These results demonstrate the potential of learned task-oriented compression for communication-efficient distributed spectrum awareness.

Data-driven Joint Detection and Localization of Acoustic Reflectors

Room geometry inference algorithms rely on the localization of acoustic reflectors to identify boundary surfaces of an enclosure. Rooms with highly absorptive walls or walls at large distances from the measurement setup pose challenges for such algorithms. As it is not always possible to localize all walls, we present a data-driven method to jointly detect and localize acoustic reflectors that correspond to nearby and/or reflective walls. A multi-branch convolutional recurrent neural network is employed for this purpose. The network's input consists of a time-domain acoustic beamforming map, obtained via Radon transform from multi-channel room impulse responses. A modified loss function is proposed that forces the network to pay more attention to walls that can be estimated with a small error. Simulation results show that the proposed method can detect nearby and/or reflective walls and improve the localization performance for the detected walls.

Data-driven 3D Room Geometry Inference with a Linear Loudspeaker Array and a Single Microphone

Knowing the room geometry may be very beneficial for many audio applications, including sound reproduction, acoustic scene analysis, and sound source localization. Room geometry inference (RGI) deals with the problem of reflector localization (RL) based on a set of room impulse responses (RIRs). Motivated by the increasing popularity of commercially available soundbars, this article presents a data-driven 3D RGI method using RIRs measured from a linear loudspeaker array to a single microphone. A convolutional recurrent neural network (CRNN) is trained using simulated RIRs in a supervised fashion for RL. The Radon transform, which is equivalent to delay-and-sum beamforming, is applied to multi-channel RIRs, and the resulting time-domain acoustic beamforming map is fed into the CRNN. The room geometry is inferred from the microphone position and the reflector locations estimated by the network. The results obtained using measured RIRs show that the proposed data-driven approach generalizes well to unseen RIRs and achieves an accuracy level comparable to a baseline model-driven RGI method that involves intermediate semi-supervised steps, thereby offering a unified and fully automated RGI framework.