Abstract:This paper proposes the joint use of digital self-interference cancellation (DSIC) and spatial suppression to mitigate far-field self-interference (SI) in full-duplex multiple-input multiple-output (MIMO) systems. Far-field SI, caused by echoes from environmental scatterers, is modeled based on the scatterers' angle and delay parameters, stored in a scatterer map. For each scatterer, the most suitable action regarding communication is selected from transmit beamforming, receive beamforming, DSIC, and no-action. This selection is based on simple metrics that show the expected uplink and downlink communication performance. In addition, emerging scatterers that deteriorate the communication are detected, and their delay and angles are acquired, providing an up-to-date scatterer map and presenting a \emph{sensing for communication} case. The proposed selection policy is compared with the individual implementations of DSIC and spatial suppression, highlighting the failure cases for each. It is shown that the proposed policy stays unaffected in these problematic cases and achieves SI-free performance.
Abstract:In this paper, a joint design of instantaneous channel estimation, beam tracking, and adaptive beamformer construction for a massive multiple-input multiple-output (MIMO) system is proposed. This design focuses on efficiency in terms of performance and computational complexity under the adverse effects of time variation and mobility of sources, the presence of multiuser and multipath components, or simply multi-clusters, and the near-far effect. The design is also suitable for hybrid beamforming and frequency-selective channels. In the proposed system, channel parameters are estimated in time-domain duplex (TDD) uplink mode using a per-cluster approach rather than a joint approach, which significantly reduces the complexity. Per-cluster estimation is possible thanks to the proposed interference-aware statistical beamforming method, namely reduced dimensional Generalized Eigenbeamformer (RD-GEB), which undertakes the computational load of interference mitigation and enables a simpler design for the remaining stages. In addition, the overall design is based on the separation of channel parameters as fast-time and slow-time, leaving only the instantaneous channel estimation and channel matched filtering as fast-time operations, which are handled inside cluster-specific reduced dimensional subspaces. Beam tracking and beamformer construction are held in slow-time rarely, which reduces the time-averaged complexity. Furthermore, beam tracking is performed by leveraging a batch of instantaneous channel estimates, which removes the need for an additional training process. The proposed low-complexity design is shown to outperform the conventional methods.
Abstract:This paper studies the capacity region of asynchronous multiple access channel (MAC) with faster-thanNyquist (FTN) signaling. We first express the capacity region in the frequency domain. Next, we calculate an achievable rate region in time domain and prove that it is identical to the capacity region calculated in the frequency domain. Our analysis confirms that asynchronous transmission and FTN bring in significant gains.