Abstract:This research paper delves into interference mitigation within Low Earth Orbit (LEO) satellite constellations, particularly when operating under constraints of limited radio environment information. Leveraging cognitive capabilities facilitated by the Radio Environment Map (REM), we explore strategies to mitigate the impact of both intentional and unintentional interference using planar antenna array (PAA) beamforming techniques. We address the complexities encountered in the design of beamforming weights, a challenge exacerbated by the array size and the increasing number of directions of interest and avoidance. Furthermore, we conduct an extensive analysis of beamforming performance from various perspectives associated with limited REM information: static versus dynamic, partial versus full, and perfect versus imperfect. To substantiate our findings, we provide simulation results and offer conclusions based on the outcomes of our investigation.
Abstract:Spectrum scarcity has surfaced as a prominent concern in wireless radio communications with the emergence of new technologies over the past few years. As a result, there is growing need for better understanding of the spectrum occupancy with newly emerging access technologies supporting the Internet of Things. In this paper, we present a framework to capture and model the traffic behavior of short-time spectrum occupancy for IoT applications in the shared bands to determine the existing interference. The proposed capturing method utilizes a software defined radio to monitor the short bursts of IoT transmissions by capturing the time series data which is converted to power spectral density to extract the observed occupancy. Furthermore, we propose the use of an unsupervised machine learning technique to enhance conventionally implemented energy detection methods. Our experimental results show that the temporal and frequency behavior of the spectrum can be well-captured using the combination of two models, namely, semi-Markov chains and a Poisson-distribution arrival rate. We conduct an extensive measurement campaign in different urban environments and incorporate the spatial effect on the IoT shared spectrum.