Signal Detection in Ambient Backscatter Systems: Fundamentals, Methods, and Trends

Internet-of-Things (IoT) is rapidly growing in wireless technology, aiming to connect vast numbers of devices to gather and distribute vital information. Despite individual devices having low energy consumption, the cumulative demand results in significant energy usage. Consequently, the concept of ultra-low-power tags gains appeal. Such tags communicate by reflecting rather than generating the radio frequency (RF) signals by themselves. Thus, these backscatter tags can be low-cost and battery-free. The RF signals can be ambient sources such as wireless-fidelity (Wi-Fi), cellular, or television (TV) signals, or the system can generate them externally. Backscatter channel characteristics are different from conventional point-to-point or cooperative relay channels. These systems are also affected by a strong interference link between the RF source and the tag besides the direct and backscattering links, making signal detection challenging. This paper provides an overview of the fundamentals, challenges, and ongoing research in signal detection for AmBC networks. It delves into various detection methods, discussing their advantages and drawbacks. The paper's emphasis on signal detection sets it apart and positions it as a valuable resource for IoT and wireless communication professionals and researchers.

Cell-Free Bistatic Backscatter Communication: Channel Estimation, Optimization, and Performance Analysis

This study introduces and investigates the integration of a cell-free architecture with bistatic backscatter communication (BiBC), referred to as cell-free BiBC or distributed access point (AP)-assisted BiBC, which can enable potential applications in future (EH)-based Internet-of-Things (IoT) networks. To that purpose, we first present a pilot-based channel estimation scheme for estimating the direct, cascaded, forward channels of the proposed system setup. We next utilize the channel estimates for designing the optimal beamforming weights at the APs, reflection coefficients at the tags, and reception filters at the reader to maximize the tag sum rate while meeting the tags' minimum energy requirements. Because the proposed maximization problem is non-convex, we propose a solution based on alternative optimization, fractional programming, and Rayleigh quotient techniques. We also quantify the computational complexity of the developed algorithms. Finally, we present extensive numerical results to validate the proposed channel estimation scheme and optimization framework, as well as the performance of the integration of these two technologies. Compared to the random beamforming/combining benchmark, our algorithm yields impressive gains. For example, it achieves $\sim$ 64.8\% and $\sim$ 253.5\% gains in harvested power and tag sum rate, respectively, for 10 dBm with 36 APs and 3 tags.

RIS-Assisted Energy Harvesting Gains for Bistatic Backscatter Networks: Performance Analysis and RIS Phase Optimization

Inexpensive tags powered by energy harvesting (EH) can realize green (energy-efficient) Internet of Things (IoT) networks. However, tags are vulnerable to energy insecurities, resulting in poor communication ranges, activation distances, and data rates. To overcome these challenges, we explore the use of a reconfigurable intelligent surface (RIS) for EH-based IoT networks. The RIS is deployed to enhance RF power at the tag, improving EH capabilities. We consider linear and non-linear EH models and analyze single-tag and multi-tag scenarios. For single-tag networks, the tag's maximum received power and the reader's signal-to-noise ratio with the optimized RIS phase-shifts are derived. Key metrics, such as received power, harvested power, achievable rate, outage probability, bit error rate, and diversity order, are also evaluated. The impact of RIS phase shift quantization errors is also studied. For the multi-tag case, an algorithm to compute the optimal RIS phase-shifts is developed. Numerical results and simulations demonstrate significant improvements compared to the benchmarks of no-RIS case and random RIS-phase design. For instance, our optimal design with a \num{200}-element RIS increases the activation distance by \qty{270}{\percent} and \qty{55}{\percent} compared to those benchmarks. In summary, RIS deployment improves the energy autonomy of tags while maintaining the basic tag design intact.

Adversarial Score-Based Generative Model for AmBC Channel Estimation

This letter presents a pioneering method that employs deep learning within a probabilistic framework for the joint estimation of both direct and cascaded channels in an ambient backscatter (AmBC) network comprising multiple tags. In essence, we leverage an adversarial score-based generative model for training, enabling the acquisition of channel distributions. Subsequently, our channel estimation process involves sampling from the posterior distribution, facilitated by the annealed Langevin sampling (ALS) technique. Notably, our method demonstrates substantial advancements over standard least square (LS) estimation techniques, achieving performance akin to that of the minimum mean square error (MMSE) estimator for the direct channel, and outperforming it for the cascaded channels.

Time-Spread Pilot-Based Channel Estimation for Backscatter Networks

Current backscatter channel estimators employ an inefficient silent pilot transmission protocol, where tags alternate between silent and active states. To enhance performance, we propose a novel approach where tags remain active simultaneously throughout the entire training phase. This enables a one-shot estimation of both the direct and cascaded channels and accommodates various backscatter network configurations. We derive the conditions for optimal pilot sequences and also establish that the minimum variance unbiased (MVU) estimator attains the Cramer-Rao lower bound. Next, we propose new pilot designs to avoid pilot contamination. We then present several linear estimation methods, including least square (LS), scaled LS, and linear minimum mean square error (MMSE), to evaluate the performance of our proposed scheme. We also derive the analytical MMSE estimator using our proposed pilot designs. Furthermore, we adapt our method for cellular-based passive Internet-of-Things (IoT) networks with multiple tags and cellular users. Extensive numerical results and simulations are provided to validate the effectiveness of our approach. Notably, at least 10 dBm and 12 dBm power savings compared to the prior art are achieved when estimating the direct and cascaded channels. These findings underscore the practical benefits and superiority of our proposed technique.

Laser Doppler vibrometer and accelerometer for vibrational analysis of the automotive components during Simulink simulation for validation

In current research, laser Doppler vibrometer (LDV) as a new diagnostic tool is utilized for non-destructive testing of the automotive equipment. LDV technique is working based on measurement of the Doppler shift of a moving object in an interference set-up. The effects of different noises are considered and eliminated from data analysis. Here, the performance of LDV technique is compared with a reference accelerometer device. Furthermore, a simulation by Matlab Simulink is added to the analysis which confirms the results of the experimental data. Results demonstrated that the laser Doppler vibrometer can measure excellently the frequencies of different automotive components for employing in industry. Therefore, it is proposed that LDV technique can be substituted with other traditional non-destructive testing methods.

A comparison between Recurrent Neural Networks and classical machine learning approaches In Laser induced breakdown spectroscopy

Recurrent Neural Networks are classes of Artificial Neural Networks that establish connections between different nodes form a directed or undirected graph for temporal dynamical analysis. In this research, the laser induced breakdown spectroscopy (LIBS) technique is used for quantitative analysis of aluminum alloys by different Recurrent Neural Network (RNN) architecture. The fundamental harmonic (1064 nm) of a nanosecond Nd:YAG laser pulse is employed to generate the LIBS plasma for the prediction of constituent concentrations of the aluminum standard samples. Here, Recurrent Neural Networks based on different networks, such as Long Short Term Memory (LSTM), Gated Recurrent Unit (GRU), Simple Recurrent Neural Network (Simple RNN), and as well as Recurrent Convolutional Networks comprising of Conv-SimpleRNN, Conv-LSTM and Conv-GRU are utilized for concentration prediction. Then a comparison is performed among prediction by classical machine learning methods of support vector regressor (SVR), the Multi Layer Perceptron (MLP), Decision Tree algorithm, Gradient Boosting Regression (GBR), Random Forest Regression (RFR), Linear Regression, and k-Nearest Neighbor (KNN) algorithm. Results showed that the machine learning tools based on Convolutional Recurrent Networks had the best efficiencies in prediction of the most of the elements among other multivariate methods.

NOMA-Assisted Symbiotic Backscatter: Novel Beamforming Designs Under Imperfect SIC

Optimal beamforming designs under imperfect successive interference cancellation (SIC) decoding for a symbiotic network of non-orthogonal multiple access (NOMA) primary users and a secondary ambient tag have been lacking. We address that issue here. The primary base station (BS) serves NOMA users and a passive tag simultaneously in this network. We develop two transmit beamforming designs to meet the user and tag requirements while mitigating the effect of imperfect SIC. Specifically, we design optimal BS transmit beamforming and power allocation to either maximize the weighted sum rate of NOMA users and the tag or minimize the BS transmit power under the minimum rate requirements while satisfying the tag minimum energy requirement. Because both these problems are non-convex, we propose algorithms using alternative optimization, fractional programming, and semi-definite relaxation techniques. We also analyze their computational complexity. Finally, we present extensive numerical results to validate the proposed schemes and to show significant performance gains while keeping the tag design intact. For example, the proposed digital beamforming increases the harvested power and data rate by 2.16e3 % and 314.5 % compared to random beamforming.