Design and Implementation a 8 bits Pipeline Analog to Digital Converter in the Technology 0.6 μm CMOS Process

This paper describes a 8 bits, 20 Msamples/s pipeline analog-to-digital converter implemented in 0.6 \mu m CMOS technology with a total power dissipation of 75.47 mW. Circuit techniques used include a precise comparator, operational amplifier and clock management. A switched capacitor is used to sample and multiplying at each stage. Simulation a worst case DNL and INL of 0.75 LSB. The design operate at 5 V dc. The ADC achieves a SNDR of 44.86 dB. keywords : pipeline, switched capacitor, clock management

A 8 bits Pipeline Analog to Digital Converter Design for High Speed Camera Application

- This paper describes a pipeline analog-to-digital converter is implemented for high speed camera. In the pipeline ADC design, prime factor is designing operational amplifier with high gain so ADC have been high speed. The other advantage of pipeline is simple on concept, easy to implement in layout and have flexibility to increase speed. We made design and simulation using Mentor Graphics Software with 0.6 \mu m CMOS technology with a total power dissipation of 75.47 mW. Circuit techniques used include a precise comparator, operational amplifier and clock management. A switched capacitor is used to sample and multiplying at each stage. Simulation a worst case DNL and INL of 0.75 LSB. The design operates at 5 V dc. The ADC achieves a SNDR of 44.86 dB. keywords: pipeline, switched capacitor, clock management

Avoider robot design to dim the fire with dt basic mini system

Avoider robot is mean robot who is designed to avoid the block in around. Except that, this robot is also added by an addition application to dim the fire. This robot is made with ultrasonic sensor PING. This sensor is set on the front, right and left from robot. This sensor is used robot to look for the right street, so that robot can walk on. After the robot can look for the right street, next accomplished the robot is looking for the fire in around. And the next, dim the fire with fan. This robot is made with basic stamp 2 micro-controller. And that micro-controller can be found in dt-basic mini system module. This robot is made with servo motor on the right and left side, which is used to movement.