Data-Driven Prediction Model of Components Shift during Reflow Process in Surface Mount Technology

In surface mount technology (SMT), mounted components on soldered pads are subject to move during reflow process. This capability is known as self-alignment and is the result of fluid dynamic behaviour of molten solder paste. This capability is critical in SMT because inaccurate self-alignment causes defects such as overhanging, tombstoning, etc. while on the other side, it can enable components to be perfectly self-assembled on or near the desire position. The aim of this study is to develop a machine learning model that predicts the components movement during reflow in x and y-directions as well as rotation. Our study is composed of two steps: (1) experimental data are studied to reveal the relationships between self-alignment and various factors including component geometry, pad geometry, etc. (2) advanced machine learning prediction models are applied to predict the distance and the direction of components shift using support vector regression (SVR), neural network (NN), and random forest regression (RFR). As a result, RFR can predict components shift with the average fitness of 99%, 99%, and 96% and with average prediction error of 13.47 (um), 12.02 (um), and 1.52 (deg.) for component shift in x, y, and rotational directions, respectively. This enhancement provides the future capability of the parameters' optimization in the pick and placement machine to control the best placement location and minimize the intrinsic defects caused by the self-alignment.

Optimization of Passive Chip Components Placement with Self-Alignment Effect for Advanced Surface Mounting Technology

Surface mount technology (SMT) is an enhanced method in electronic packaging in which electronic components are placed directly on soldered printing circuit board (PCB) and are permanently attached on PCB with the aim of reflow soldering process. During reflow process, once deposited solder pastes start melting, electronic components move in a direction that achieve their highest symmetry. This motion is known as self-alignment since can correct potential mounting misalignment. In this study, two noticeable machine learning algorithms, including support vector regression (SVR) and random forest regression (RFR) are proposed as a prediction technique to (1) diagnose the relation among component self-alignment, deposited solder paste status and placement machining parameters, (2) predict the final component position on PCB in x, y, and rotational directions before entering in the reflow process. Based on the prediction result, a non-linear optimization model (NLP) is developed to optimize placement parameters at initial stage. Resultantly, RFR outperforms in terms of prediction model fitness and error. The optimization model is run for 6 samples in which the minimum Euclidean distance from component position after reflow process from ideal position (i.e., the center of pads) is outlined as 25.57 ({\mu}m) regarding defined boundaries in model.